1 / 2
Emile The Seal - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So, I chased this friendly bee.. and ended up at the sea! First thing I looked at was this Seal, called Emile!
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
15-20% Infill (Dependent on selection for reliability but mainly preference)
20-30 Degree TREE Support Recommended (30 may involve excessive support removal)
Scale is ready to print though models with more thin areas could do with scaling up in slicer to print more reliably - Maxi The Monkey, Dee The Bee,
Adaptive/Variable layer heights can improve speed/form - especially if used as base model for painting anyway. min0.08-0.2max layer heights (0.2 ONLY FOR MULTICOLOR PRINTING)