1 / 5
VW california heater pipe adapter to pop-top — zdjęcie 1
1 / 5

VW california heater pipe adapter to pop-top

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

In order to mostly heat above, I designed those two adapters to redirect some of the flow above.

Ocena
0 / 5
Polubienia
15
Pobrania
166
Wydruki
0
Wyświetlenia
1003
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

In order to heat above, I designed this adapter. 
You need to buy one flexible aluminium pipe to connect the two element(something around 9-10cm diameter, I'm not exactly sure anymore.

Then you can connect one side to the vent:

 

And the other end slide into the rail of the sliding roof sliding door:

 

And Tada:

 

Important: It's quite hot when exiting the pipe, I strongly recommend using ABS/ASA for the bottom part. PETG reach glass temperature but doesn't melt, so could also work but not very durable(PLA is not an option).

Tagi