8mm linear rod mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
print this and use a 8mm rod along with the quick change universal spool holder…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 871
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
print this and use a 8mm rod along with the quick change universal spool holder https://www.thingiverse.com/thing:1241566](https://www.thingiverse.com/thing:1241566 by Foreverwinter https://www.thingiverse.com/Foreverwinter
I mounted this to the back right of my tronxy x3 right behind the stock location of the extruder. It should be noted that my X3 is raised from stock so its has 125mm legs to lift it up. This makes it so there is room for the spool to be mounted on the side like I have it.
Uses 2 M4x10 screws that are inset to mount inside before inserting the rod.
Print instructions
Category: 3D Printer Accessories