1 / 1
large knob for Philips EE 2000 series kit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the tuning knob for the capacitors in the Philips EE20xx kits from 40 years back. There are a few versions suit.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed a couple of spare knobs for the Philips EE2003 and such kits. As nothing commercially comes close to the original, I had to made one.
Well, a few incarnations were made till it fitted well.
I used black PLA, 0.15mm layer height. I used no supports are they were an pain to remove and I build in a structure to carry the slacking PLA. Best print in the orientation as is, else the build in support bars have no function.
Enjoy.
If rehashing, just mention the orginal.