1 / 2
BRESSEL Finder scope better holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder replaces the old and hard to adjunst holder.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This holder replaces the old and hard to adjunst holder.
I strongly recomend to tune your printer before you print this model
Print settings:
All layers height : 0.2mm
Brim - for the RING
No brim - for the SPACER
Aditional hardware needed
8x - ISO 4032 M3 nuts
2x - ISO 10642 M3x14 screws (To mount the base)
6x - ISO 4762 M3x16 screws (To adjust the finder scope)