YTX20HL-BS Battery Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for installing YTX20HL-BS battery where an Odyssey PC680 once resided.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A previous owner had cut out the battery bracket on my stupid little sports car to install an Odyssey PC680. When it came time to replace that battery, I opted to install a Yuasa YTX20HL-BS and drew up this bracket to replace the Odyssey bracket.
The model is designed for printing with 0.8 mm nozzle with tall layers and lots of perimeters.
The included photo is in PLA for prototyping purposes, but if you're expecting this to survive in use you should print it in a more performant material, such as colorFabb PA-CF or Forward-AM Ultrafuse PA6 GF30.