1 / 3
Cost saving DIY filter housing 525x185x24mm for HRV — zdjęcie 1
1 / 3

Cost saving DIY filter housing 525x185x24mm for HRV

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filter housing accommodates filtermedium G3/G4/M5 of 20mm.

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
163
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Save lots of money on filter replacements for your HRV ventilation unit. With this filter housing, you can easily replace the filters with a filter medium with a thickness of 20mm.
You can buy a filter medium to your liking and cut it to size to fit this housing.
I've used this filter housing in a Ubbink Ubiflux W300/W400 HRV unit. 
Assembled outer size: 525(l) x 185(w) x 24(h)mm.

Print:

  1. Parts 3 and 4 (largest) need to be printed twice.
  2. PLA works great.
  3. Needs support on the small recesses.

Assembly:

  1. Part 1, 2 and 3 need to be glued together.  (I've glued with Loctite Super Glue-3 Power Flex)
  2. The 9mm wide recess accommodates a sealing tape. (I've used tesamoll® E profiel)

Disclaimer:

This model is provided with no warranties express or implied.
When using it, you are doing so at your own discretion and risk.

Tagi