Scout Card Game Insert - minor remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tokens organizer for the original Scout Game box.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 246
- Wydruki
- 7
- Wyświetlenia
- 1009
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Kudos to the original designer.
This is a minor remix removing the divider in the 1's tokens, as the tokens with our game were a bit thicker and didn't quite fit with the sloped divider.
I've included some g-code which can be used with Prusament PLA.
If you print without using the included gcode, I recommend setting your exterior wall width to 0.3mm. This lets your slicer deal with some of the thin divider walls, instead of it splitting up the walls with seams in the middle.
Alternatively, if you're using Prusaslicer with a 0.4mm nozzle, you could set the Advanced→Arachne perimeter generator→Minimum perimeter width=75%
If you're tired of the cardboard box your Scout game came in, check this out: https://www.printables.com/model/1086166-slide-n-lock-box-for-scout-game-insert
