1 / 4
Tri - The Legend of Zelda: Echoes of Wisdom — zdjęcie 1
1 / 4

Tri - The Legend of Zelda: Echoes of Wisdom

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here's my version of Tri, Zelda's floating companion in The Legend Zelda: Echoes of Wisdom.

Ocena
5 / 5
Polubienia
49
Pobrania
273
Wydruki
3
Wyświetlenia
1155
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Standard Digital File License

My wife planned to dress up for Halloween as Zelda “in disguise” as she appears in The Legend of Zelda: Echoes of Wisdom, and it was my job to make Tri and the Tri Rod. Here's my version of Tri! At this scale, Tri fits perfectly in the palm of your hand. This Tri doesn't have any triangles tailing behind them because we like to imagine that they're busy maintaining some echoes around the house. ;)

I modeled Tri in Blender and used OrcaSlicer to cut them into two halves with dowel holes. I strongly recommend using your slicer's “variable layer height” setting to decrease the layer height as much as possible on the top/front of Tri's face. Also, you may need to scale down the dowels a bit depending on your printer/filament. The original “correct” size was too tight for my print, and I think I had to reprint the dowels around 95% for a perfect fit. YMMV.

Tri's body is hollowed out to reduce filament and print time, making it basically a thick spheroid shell. I strongly recommend printing with supports. I used normal “snug” supports at 45 degree threshold, but other support structures like tree would probably work fine too.

I super-glued the two printed halves together with the dowels in place. Glue is a requirement here because the dowels will not hold the halves together on their own! Once the glue cured, I mixed cheap acrylic craft paints with water and isopropyl alcohol to feed into my cheap airbrush (thanks, Harbor Freight) to coat Tri with this smooth gradient from off-white (very top) to yellow (most of the body) to dark green (“feet” and underside). My wife painted the slightly-inset eyes and mouth with black acrylic, and I gave the whole thing a final protective coat of lacquer spray. Despite the high post-print efforts involved, I really do think airbrushing and painting Tri by hand perfects their in-game look. You could probably simulate the gradients with a million filament changes, but I wouldn't advise it.

 

Update: The files that I printed and originally uploaded here are now moved to the “split model” folder. I added a second folder “not-split model” if you want to rotate the model and split (or not) the original shape in a better orientation for your printer. That now includes both a solid and a hollow version. The hollow version is what the split model I printed was based on.

Tagi