1 / 2
iPhone 14 Promax Rear Camera Cover (Print In Place) — zdjęcie 1
1 / 2

iPhone 14 Promax Rear Camera Cover (Print In Place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

iPhone 14 Promax Rear Camera Cover

Ocena
0 / 5
Polubienia
5
Pobrania
37
Wydruki
0
Wyświetlenia
351
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I broke the camera glass on my iPhone this week. Thankfully I had Apple Care so it wasn't super expensive, just inconvenient to not have my phone for a few hours and having to reset everything again. So to avoid that in the future I made a camera cover for my case.

 

I CAN confirm fitment on an iPhone 14 promax Otterbox Defender Series XT as that is the one I have, Possible it fits others with similar specs though. It is attached with a 40mm piece of 3M ¼ inch double-sided tape. I don't have a way to get a decent picture of it attached but it does cover it and still leaves the case fairly slim.

PRINT IN PLACE!!!

Place supports for the cover and the tape cut-out

Variable layer height on the highest quality settings would be best.

Tagi