Einfacher Adapter: Filamentspule zum umspulen mittels Akkuschrauber / Simple Cone: Filamentspool rewinding with screwdriver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kegel für Filamentspule für Akkuschrauber Cone for Filamentspool rewinding with screwdriver
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 197
- Wydruki
- 2
- Wyświetlenia
- 1131
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Kegel für eine 10mm Gewindestange z.B. zum umspulen von Filamentresten mit einem Akkuschrauber. Benötigt werden 2 Kegel (siehe Bilder)
Schichthöhe: 0.24mm, PLA
Infill: 25% Cubic
je 4 Schichten (Wall, Top, Bottom)
Durchmesser: ca. 52mm bis ca. 68mm
------------------------------------------------
Cone for a 10mm threaded rod, e.g. for rewinding filament residues with a cordless screwdriver. 2 cones are required (see pictures)
Layer height: 0.24mm, PLA
Infill: 25% Cubic
4 layers each (wall, top, bottom)
Diameter: approx. 52mm to approx. 68mm