1 / 2
(Un)original Prusa Drybox Beams F without bottom holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seals the bottom hole in the front of the classic variant of the drybox.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 347
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (18)Powiązane
This closes the bottom cutout in the front beams of the enclosure which isn't needed when using the MMU auto rewinder.
https://www.printables.com/model/702217-mmu3-mmu2s-5-spools-auto-rewinder-adapter-for-unor
The original kept warping, as it only floated above supports. Fixes that as well.
Kept the overall fit of the original part so the panels still fit.
Can be printed in the original orientation or rotated on the front face, depending on the printers ability to print steep overhang