Pinion for automatic chicken coop door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a door for the chicken coop online and one of the pieces broke, so I made a design of it to replace it.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 51
- Wydruki
- 2
- Wyświetlenia
- 914
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- GNU General Public License v2.0
A few months ago I bought an automatic door for my chicken coop through an online shopping portal.
After a while, I saw that it stopped working and apparently the plastic pinion (very soft and poor quality) that is attached to the motor shaft had broken. Obviously I couldn't find any type of replacement, so I decided to replicate the model by making my design.
The result was easy and totally satisfactory, the door now works perfectly.
Printed in Petg and with a layer height of 0.15
*You can use the same screw that the original sprocket included and if you add a light touch of superglue even better.
I hope it helps you!