Rugged Radio Holder With Ball Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slip your Rugged GMRS radio into this mount, and the battery clip will hold it in place. Has a 19mm ball mount
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Works with the Bulletpoint knockoff Jeep JL ball mount system sold on Amazon and the Rugged Radio handheld with microphone.
I used Organic Supports and oriented the ball mount with the ball side down. Ball side down seems to give a nicer print and wants less support.
Mine was printed in PETG with 5 Walls and 4 top and bottom layers.
Use a #10 x 1 ½" machine screw and CA adhesive to fix the ball to the body of the radio holder.
Use 12mm x 6mm magnets with CA adhesive and press the magnets in the recesses of the radio holder and the microphone mount, maintaining the correct polarity to have the magnets attract. (I seem to glue the magnets in “repel mode” way too often.)
Please share pictures, comments, and ideas about how I can make it even better.