1 / 2
Nazgul Evoque FPV drone back part (with HGLRC GPS module) — zdjęcie 1
1 / 2

Nazgul Evoque FPV drone back part (with HGLRC GPS module)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An almost exact 3D Model of the back part of the Nazgul Evoque FPV drone and one with the HGLRC M100 GPS module.

Ocena
0 / 5
Polubienia
5
Pobrania
72
Wydruki
0
Wyświetlenia
349
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't find the back part of the Nazgul Evoque properly 3D modeled on the internet for additional GPS module, so I designed an almost exact replica of the part where the XT60 and the video antenna are and extended it for the HGLRC M100 GPS module (both files are attached). Feel free to modify it for your own GPS module!

I printed the part using TPU, which I would recommend you do too, because it's more crash resistant and the original was also made from TPU. 

If you also mount the HGLRC M100 GPS module using my 3D model, keep in mind to fly carefully because the module isn't mounted too firmly.

Tagi