Ender & CR-10 Filament Guide with built-in locking PTFE tube coupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(pictures coming soon) Like many of us, I noticed that the filament was digging a larger hole through my extruder…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 631
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
(pictures coming soon)
Like many of us, I noticed that the filament was digging a larger hole through my extruder block lever because of the the angle the filament takes when top mounted.
This simple yet effective design takes the idea of @The-Doc 's guide and a printable coupler from my extruder block. Lock in a piece of PTFE tube and let the guide do the rest.
Uses stock hardware. Works with top or side mounted spools.
Enjoy and post your makes!
If you found my Things useful, treat me to a cup of coffee by using the PayPal button below :) Buy me a cup of coffeeBuy me a cup of coffee $3.00 USDBuy me a massive cup of coffee $5.00 USDGive me a caffeine coma $10.00 USD Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
100%
Filament: Inland PLA Peak Green
Notes:
Use supports from bed only
35% "lines" supports
210 on hotend
70 on bed
10 line brim
40mm/s
IMPORTANT: PRINT WITH THREADS UPWARD
How I Designed This
Here is an example of how I print mine with the settings above
Category: 3D Printer Accessories