E46 Airvent Gaugepod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gaugepod to replace the center airvent of a e46 track car. Edit: added a blank ones without holes
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 231
- Wydruki
- 0
- Wyświetlenia
- 1107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Gaugepod for 52mm gauges. I have only printed a testpiece of it, as i changed my setup to remove my single gauge when going to a stand alone, but my phone mount (pictured in my car) is made from the same model, so the overall fit in the dashboard should be good.
Make sure to print from something that can take the heat like ASA etc. (and keep shrinkage of whatever material you use in mind)
Holes are modeled at 52mm, fit my singular gauge well, but i can always make an adjusted model if there should be any issues.
Edit: Added two versions without the gauge holes cut out,one exactly the same just without the holes and one one with the main “pocket” cut 5mm further back, making the wall thickness of the flat surface thinner.
Would love to see pictures of this in cars!