Trashcan Bag Clip / Liner Clip (designed for Hyper Tough 32 gallon, but may fit other cans too) v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print 2-4 per can as needed. To install, catch bottom lip, and rotate onto can lip. Should snap into place, holding bag.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
To install, catch bottom lip, and rotate onto can lip. Should snap into place, holding bag. Print 2-4 per can, as needed.
VIDEO, 1-second INSTALL:
Print tips:
- Print as oriented.
- Prints with no supports needed.
- Print either in PETG or PLA. (PETG works great.)
NOTE: If it does not quite fit your can, but could if it was a little bigger or smaller, consider simply scaling its size in your slicer!
In the image below, the trashcan is dark gray, and the bag clip is in red.
Finally, if this works for your can that is a different brand or different size/capacity from mine, please let me know details in the comments!