1 / 3
Kegland NukaTap Mini FC Disconnect Kit - Clip on Bending Support Brace
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brace to stop tap flexing.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 680
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (28)Powiązane
The kegland nukatap mini and flow control disconnect is a pretty cool little widget, but flexes way too much in stock form.
This brace clips straight on and reduces almost all the flex.
I also tried a top pin - had a 2mm bicycle spoke lying around, VERY CAREFULLY drilled through the top clip/rib. This works well too, both together it barely moves.
tap/FC disconnect kit is here:
https://kegland.com.au/products/nukatap-mini-fc-disconnect-kit