Custom Rain Gutter Bracket for Tarp/Awning Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for attaching a tarp/awning to a car or camper van rain gutter. Includes a test piece for size fitting.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This bracket is designed to attach a tarp or awning to the rain gutter of a car or camper van. It consists of two parts: a strip that fits into the gutter and a C-shaped counterpart that presses the strip tight.
I remixed this design from [Thingiverse](https://www.thingiverse.com/thing:4156741) because the gutter on my Ford Transit MK6 is wider than the one in the original design. I've attached measurements comparing the two versions.
Material List for 3D Printing:
- 1x strip for rain gutter
- 1x C-shaped counterpart (ensure to print the C-shaped counterpart upright for added stability)
Screws:
- 2x M5 x 18 mm
- 1x M5 x 45 mm (longer screws also work)
- 2x M3 washers
- 1x M5 washer
- 3x M5 nuts
I’ve also included a test piece to help you check the fit before printing the full version.
If you find my design useful or it inspires your next project, feel free to show your support with a coffee or a beer—cheers! 🍻☕