Custom Instagram Followers Frame with MAX7219 & D1mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created a custom Instagram followers frame for my wife’s business using MAX7219 and D1mini.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
For a while, I’ve wanted to surprise my wife with one of those Instagram Followers frames for her business (@designbyroberta). So, I grabbed a MAX7219 and decided to make it look nice.
After finally getting it to work with the FB/Instagram API (shoutout to the Arduino Instagram Stats library), I quickly realized that hot glue wasn’t going to cut it this time. So, 30 minutes of Fusion360 design and 2.45 hours of printing later, I had a sleek holder for the MAX7219 and the D1mini all snugly attached to the frame.
I used a standard frame (about 18x13cm). For printing, I used Tree Support touching the bed plate and made sure the D1mini holder was facing up.
Made a happy wife, and happy days for me! 😎If you find my design useful or it inspires your next project, feel free to show your support with a coffee or a beer—cheers! 🍻☕