Creality Space Pi - Replacement handle and sidebars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle and sidebars to provide better seal on the lid and reduce the rate at which moisture seeps back in
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 1193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I found the lid on the dryer did not give a very good seal and if you pushed down on the top the sides of the lid splay out. So i made this repllacment lid and sidebars which acccomodate a 3mm thick strip of rubber and provide a tight connection.
The handle is just fixed using the original handle screws and I have just stuck the sidebars on with doublesided tape for now as I amy play with the design.
For the rubber insert I used this as I had some in the man drawer and then just cut to size with a craft knife.
https://www.amazon.co.uk/sourcing-map-Solid-Rectangle-Rubber/dp/B07ZKSR4TL
“Solid Rectangle Rubber Seal Strip 20mm Wide 3mm Thick”