Omnifixo case/box with storage space
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My remix of original omnifixo box
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 71
- Wydruki
- 2
- Wyświetlenia
- 411
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a large version of the Omnifixo case because the original feels very fragile and removing magnets is kinda pain for me.
It's nice to have a case where every part has it place and looks tidy, but I don't have the nerves to remove and put back every part exactly as it should be.
This one has more space and you don't need to dismantle clamps from magnets for the storage.
Box also offers space to store other soldering equipment and doesn't require supports to print.
I took the idea of having space to slide in the plate, offering more versatility and also to use built in magnets for the box to hold plate in place.
My print settings:
- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: Smooth PEI
- nozzle diameter: 0.4mm
- print orientation: bottom down
- material: natural PLA
- supports: none
- perimeters: 3
- solid layers (top/bottom): 5/4 (defaults)