qidi x-max3 filament holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Left Rear mount filament holder with attachment point for BTT smart runout sensor V2
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Qidi X-Max3 Filament spool holder and BTT Smart Filament Sensor V2 mount
I have made this filament spool holder for the Qidi X-Max3
It mounts to the original runout sensor mounting with 4 screws
or you can used 2 x 6mm bolts by inserting riv-nuts 'which is what I did'
it also requires 2 holes '2mm' drilled in the top panel for support bracket
I used 2 of the runout sensor srews.
The upper bracket bolts to the lower bracket with 2 x 8 mm x 25 bolts and washers.
Print goju_544593 'Ender 3 V2 filament spool holder'
https://www.printables.com/model/1078927-ender-3-v2-filament-spool-holder-all-3d-printed
This attaches to the top arm.
The filament guide bracket mounts to the outside of lower bracket and spacer on the inside,
I used 3mmx50mm screws x3 to attach to
'BTT Smart Filament Sensor V2' which mounts on spacer bracket.
The thread in the filament guide is 10x1 mm for 10mm thread filament nozzles
I know it may be more than needed for the job but its not going to brake
and I also printed mine with PAHT-CF which prints nice and is very strong
but other filaments may do the job?
Top Bracket print standing on base plate with tree support
Lower bracket print laying on its side with top support up no support
filament guide bracket on side facing up with tree support