filament box feed-through and label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riffing on the "Screwless Filament Feeder" idea here: https://www.thingiverse.com/thing:1750875, this allows filament…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Riffing on the "Screwless Filament Feeder" idea here: https://www.thingiverse.com/thing:1750875, this allows filament to spool through a container wall, and provides a fancy label of the filament type, printed in that filament. Also include a clip to hold two filament tubes to each other, and a clip to route a filament tube on the inside of the box.
Print instructions
The models that start with "mm*" are multi-material, and their parts need to be loaded together into slicer. EG, in Slicer, select and open these two files together: mm_petg_tag.stl and mm_petg_tag-text.stl.
The tags and scarabs do not need support; the scarab grippy bracket has a small support enforcer. The tagholders are in separate .3mf files because, while they do not need support, they do need to print with a brim.
In the g-code, filaments 1-3 are PLA, 4 & 5 are PETG.