1 / 6
Horizon Hobby Super Cub Motor Mount Nose Holder Fuselage Front Piece Cowl — zdjęcie 1
1 / 6

Horizon Hobby Super Cub Motor Mount Nose Holder Fuselage Front Piece Cowl

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mounting plate was all sorts of mangled on my plane, so I decided to create a model and print a new one.

Ocena
0 / 5
Polubienia
1
Pobrania
37
Wydruki
0
Wyświetlenia
218
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Replica of the Horzion Hobby Super Cub motor mount mount. For the lack of a better term, this is what most motor mounts screw into… Maybe someone can tell me what it is actually called, haha.

Uses some Nylon M3 screws and nuts to replicate the original long bits. M3 inserts are pressed into the motor mount holes.

WARNING: This may not fit the original cowl. I'm not sure how flexible it is, but my model doesn't have the bottom angle modeled since I was lazy and have no use for it (my original cowl was busted so I printed a new one as well). Other than that, it fits my plane really well!

The two part design prints without supports. The 3MF file includes two bodies. Make sure you mount the shim in the correct orientation to get the right motor angle (slightly down and to the right).