1 / 1
Router guide for cutting grooves in bottom of doors — zdjęcie 1

Router guide for cutting grooves in bottom of doors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This guide fits on the base plate of a router and makes it easy to cut a slot in the bottom of a door

Ocena
0 / 5
Polubienia
9
Pobrania
50
Wydruki
0
Wyświetlenia
332
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed to convert three doors into sliding doors for a wardrobe. This included routing a slot down the middle of the bottom of the doors for the guide, which helped the doors slide evenly. Since I had the door thickness I designed this guide to replace the baseplate on my Ryobi trim router, with two guides, so it held the bit centrally when routing.

it worked better than expected so I decided to share the files plus the Fusion360 parametric version for people with different routers.

 

The project included a set of depth gauges as I could only route 5mm at a time.
https://www.printables.com/model/1087250-depth-gauges-for-router 

Tagi