Yoyo display stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple yoyo display stand for 9 yoyo's or other similar sized items.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Yoyo display stand for up to 9 yoyo's.
Printing this in draft quality is fine. There is some tolerance for it to slide together, so I'd just print it “as fast as you can”. If you have issues with the prints lifting off, try using “mouse ears” in your slicer.
You will need 3 pieces with the ridges and 5 without. If you don't care for the ridges, simply print the flat piece 8 times.
For additional sturdiness - when you are planning to wall mount for example - I would not rely on friction fit only, but instead use some glue where the parts meet.