JetKVM Under Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
JetKVM under desk mount for workstation remote access or power control
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 258
- Wydruki
- 3
- Wyświetlenia
- 1532
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I did some quick modelling while waiting for the JetKVM Kickstarter campaign to end. Using their provided JetKVM 3D Model, I designed this under desk mount that might come useful for someone using their JetKVM at their workstation for remote access or power control.
To attach the JetKVM to the mount, this design requires 2x M2x10mm screws in place of the original 2x M2x5mm screws, and 2x M5x15mm or similar ones for screwing the 3D printed mount to the desk
For optimal strength and rigidity, I recommend printing the sled on its 25 degrees angled back oriented downward on the print bed. This orientation aligns the layer lines along the longest structural spans, reducing potential weak points and increasing overall durability.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
**Resolution:**
0.2
Infill:
30
**Filament Material:**
PETG
Category: Computer