Modified - Raspberry Pi Zero 2 W case (cooler/heat sink compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sören's RBPi Zero 2 Case, but with a couple adjustments to work better. .STEP file Included
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modified the Raspberry Pi Zero 2 W case from Sören to better suit my preferences.
.STEP file includes the Raspberry Pi Zero 2 W, as well as the Geekworm C296 cooler and its hardware
Cooler: Geekworm C296
Amazon ASIN: B09QMBCXLB
Unfortunately, you will still need to secure the lid to the case with some glue or tape. The walls are smooth enough, and there's not enough pressure against them to keep it held together. I am currently working on fixing this, but I wanted to get the model out there first.
The layer of case that the nut and screw tightens on is rather thin because of the length of screw that comes with the cooler, but you shouldn't be applying too much pressure to the PCB anyways.
This model is sized for .2mm layers.
I recommend supports on the port holes, but NOT the nut holes. They are designed to be support-less. Removing supports from the nut holes after printing may damage them.
Credit to wiki.geekworm.com for the RPi0 2W .Step file.
Geekworm C296 Cooler was modeled by me. Should me as correct as it needs to be.