1 / 4
Stanley No.4 "Sweetheart" Handplane Shootingboard Grip — zdjęcie 1
1 / 4

Stanley No.4 "Sweetheart" Handplane Shootingboard Grip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Grip to use a No.4 Sweetheart plane more comfortably as a shootingplane.

Ocena
4 / 5
Polubienia
9
Pobrania
77
Wydruki
2
Wyświetlenia
372
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Open Community License v1.1

Using a No.4 plane on a shootingboard without a grip is subobtimal; at least for my hands it was. So I made a grip which is somewhat comfortable, I will possibly modify it in the future if I still get sore spots or something.

Mine was printed with the"horn" upright, but for that your support interfaces should probably be dialed in pretty well, otherwise it will be hard to remove the supports.

The tolerances aren't especially tight, but the upper part might break off if the distance between the lower and upper part isn't big enough, for example if there isn't enough support surface and it sags too much during printing.

 

Tagi