1 / 1
MK3 RHD FanDuct Rev. C - Fan Holder - MK2.4Extruder — zdjęcie 1

MK3 RHD FanDuct Rev. C - Fan Holder - MK2.4Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cheetos Designed Fan Holder to mate MK3 RHD FanDuct Rev. C to MK2.4Extruder

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
278
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A Fan Holder, mating the excellent MK3 RHD Fan Duct Rev. C by RH_Dreambox to the Original Prusa MK2.4 Extruder design by MattsHub.

got the dimensions almost right, the bottom 'pillar' needs about 3 0.5 mm washers. might fix this in the future, if it starts to bother me. 

----Update: included V2, which has the correct dimensions, adjusted some other things for easier printing and easier insertion of an M3 nut. 

Note: that V1 can still be downloaded, if you really want, but keep in mind this required a couple 0.5 mm washers.

See https://www.thingiverse.com/thing:3249344

& https://www.thingiverse.com/thing:3179632