1/8" Riser Pad Indy Style + Riser Pad Thunder Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This riser pad is for both new school and old school Indy pattern holes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Not too much to say here other than it would probably be best in ABS but I have been riding these for quite some time and PLA Pro has also worked well. I didn't use infill and I used just the standard .2 mm build height with a .4 nozzle. Though modern boards have the same hole pattern the location of the holes on the truck baseplate aren't the same on Thunder vs Indy. I dislike the oblong slotted generic risers so I decided to make my own. The Indy pattern version also fits Venture trucks. I haven't ridden some of the other brands so I guess some of you can let me know if they fit others or not.