Lidl Dishwasher tablet dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes it easy to pick a new dishwasher tablet! See the different variants and improvements.
- Ocena
- 5 / 5
- Polubienia
- 492
- Pobrania
- 1468
- Wydruki
- 7
- Wyświetlenia
- 8985
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on the great model by @ KaliM.
UPDATED VERSION v3 on December 1st 2024.
Changes:
- Walls are thicker (3 layers)
- Vertical hole at the front is bigger: easier to guide tablets going in
- Hole to retrieve tablets is bigger (vertically & horizontally) to make it easier to grab a tab
- Inside bottom is sloped
- Everything remains print-in-place, no supports.
- v3: added lid, cutout in dispenser top to make it easier to remove the lid, some updates to make the shape print better without
- v3: fixed measurements and removed the base/extend concept. Just provide the different sizes.
Tested: Lidl W5 dishwasher tablets, model: "all in one power" with water soluble film, size: 35x25x15mm
Models: There are 4 ready-to-print models.
Measurements: Height: 160mm, Deep: 43mm, Width: see below
Capacity, print time, filament, size with number of funnels:
The TIME shown is without and with variable layer height (which makes it look a lot better)
| Tablets | Time (norm/var) | Filament | Width | |
|---|---|---|---|---|
| 1 funnel + lid | 12 | 150/159 min | 35 | 32mm |
| 2 funnels + lid | 24 | 184/198 min | 60 | 62mm |
| 3 funnels + lid | 36 | 223/255 min | 84 | 93mm |
| 4 funnels + lid | 48 | 250/314 min | 108 | 124mm |
Printer: Prusa Mini+, FW 6.1, inputshaper enabled, 15% infill, 0.2mm layer, 0.4mm nozzle, PLA
TIP: to remove the lid, in Prusa Slicer
- Select the model
- Right click, select Split and ‘Split to objects’
- Now you can deselect everything and select the lid to remove it.