Nand Reader Legs - M2.5 Nut Leg & Tightening Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, This is an inspiration from topic 12106 on the Flash Extractor forums. These are legs in which you can simply sup
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 390
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Hi,
This is an inspiration from topic 12106 on the Flash Extractor forums.
These are legs in which you can simply super glue an M2.5 nut inside to easily remove and replace adapters or tighten nuts on other adapters.
The FE post's .OBJ file does not actually have a cutout for the nut even though the preview looks like it should, so I have created the cutout for the nut. I have also created the entire leg hexagonal for easier removal and tightening. I've come across two thicknesses in nuts, so I've created variations for each. The thicker leg will work with the thinner nut, but it does not sit flush. With good enough adhesion, that shouldn't be too much of a problem, but I've included both files if anyone has a predominance of one or the other.
Added shorter versions (6.75mm). With the nut glued, they can be used upside down with the voltage adapter.