chair for ski lift

this is a ski lift chair i made.

it works with te cable connector from UppfinnarAXEL.

i made the seating part a diffirent file so you can print it in an other colour if you want.

what do you need : glue, tape, small screw

How to assemble:

step 1

print all parts.

step 2

glue the sides of the chairs to the seating part (there are slots where you can slide it into).

step 3

let it dry.

step 4

put tape around the sides of the ends of the hanging bar that fits inbetween the 2 sides

before putting it inbetween the two sides put a small dot of glue on both ends.

step 5

wrap the tape around the ends that the hanging system stays in place.

step 6

let it dry 

pay attention that the mounting bar is leaning a bit forward beacause otherwise the cable mount will bloc between the big wheels in the top and bottom station.

step 7

mount your chair to the cable and try it out.

if you have any problems feel free to contact me direcly .

i will try to answer as fast as i can.