Elegoo Neptune 4 Tool Holder Base Mountable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool holder for the Elegoo Neptune 4 printers, but mountable to the printer base rather than the top of the printer.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 334
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I really liked the tool layout of the nicolasmtl's original design, but I didn't want it mounted on the top of my printer where it can wobble and potentially cause problems with the leadscrew.
This remix retains the tool layout, but allows the tool holder to be mounted to the 20x20 profile on the printer base. You will need 4x M4 bolts 6-8mm long, and 4x M4 t-nuts.
It should print fine in PLA, I printed mine in PETG. See the photo for the intended print orientation. You will also need to use supports for the side cutters holder, I recommend using painted supports for this area only.