Honeycomb Mailbox for your home office
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mountable letter holder for inside your home.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a mailbox for my home office so that mail doesn't pile up on the desk. I hung it outside my office door, so now when mail comes in, letters can be placed in this box until I have time to go through it.
I try to avoid putting too many holes in the walls, so I made this to attach to the wall with Command Strips. There are 2 indents on the back sized specifically for the Large strips.
I made this wide enough to fit the width of standard envelopes and mail. It should fit on most printer beds when rotated 45 degrees. My printer bed is 235 x 235, and it fit perfect when placed on a 45° angle.
Print Settings
Printer: AnkerMake M5
Filament: PLA+
Infill: 10%
Perimeters (Wall loops): 3
Solid Shell Layers: 4 top, 4 bottom
Supports: Optional. There is 1 overhang of 100mm above the text on the front. I didn't bother with supports and it came out just fine. If your printer is not great at bridging gaps that long, you may want to paint on tree supports just for that one area. I'll attach a photo showing where.
Layer Height: 0.2mm