Gridfinity Holder for Cleco C-Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Gridfinity holder using 1x2 squares, for cleco clamps P/N AT-542.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a Gridfinity holder for storage of cleco C-clamps, in a vertical orientation. These clamps are sold by Aircraft Tool Supply (and probably other suppliers), and are part number AT-542. They are typically used in aircraft sheet metal repair and fabrication, but are of course useful for many other clamping tasks.
Like my other Gridfinity models, the bases are altered to accept 6x3 magnets as a press fit, with the upper surface of the magnet holes modified to make the slicer bridge across correctly for a clean result. The units pictured were printed out of Polymaker blue ABS on my Voron 2.4 using a 0.6mm nozzle, at 0.3mm layer height.