1 / 2
Nakatomi Plaza (Die Hard) Christmas tree decoration / ornament — zdjęcie 1
1 / 2

Nakatomi Plaza (Die Hard) Christmas tree decoration / ornament

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an add-on to the awesome John McClane Christmas tree ornament by Frikarte3D.

Ocena
5 / 5
Polubienia
70
Pobrania
179
Wydruki
3
Wyświetlenia
750
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Updates

  • 12/2024: Slight tweaks to some lines and a bit more red in the explosion (v1.2).

 

Description

This is an add-on to the John McClane (Die Hard) Christmas tree ornament by Frikarte3D. I've already remixed two designs in this series and added one more:

With the addition of Nakatomi Plaza, you can now print all your christmas heros, the villain and the main location! The model is also available without the “Merry Christmas”-plate and without the explosion.

Colors @ 0.2 mm layer height are:

  • Gold (layers 1-13)
  • Black (layers 14-17)
  • Red or dark orange (layers 18-20)
  • Yellow or light gray (layers 21-23)
  • White (layers ≥24)

 

Print settings

  • Layer height 0.2 mm
  • Line width 0.4 mm
  • Infill 30%
  • 3-4 wall lines
  • 5 top & 4 bottom layers
  • Supports not required

Approximate print time @ 60 mm/s: Regular 1:25 h / No plate 1:05 h / No explosion 1:10 h

Tagi