Nissan Spare Tire Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric replacement part for the spare tire hanger (hoist) on a Nissan Versa Note.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 614
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
| v2: Status Update & Improvements (2024.02.24) |
|---|
The original model worked amazing well and lasted for over 2 years. However it slowly started to warp & deform from the strain. I redesigned the model (with some engineering help) to increase the strength and avoid the hook warping. Link to updated OnShape Model
Changes
- Fix Hook Warp: Added a support rib to the back
- Fix Nut Warp: Adjusted hex nut placement
- Improve Print: Chamfer edges instead fillet
- Improve Print: No need for supports
 | 
|
| Old vs New Photo | Old & New CAD |
| v1: Original Model (2021.12.30) |
|---|
This is a replacement part for the spare tire hook/hoist on a 2015-2019 Nissan Versa Note.
The bolt & hook assembly on my car rusted together and a replacement hook & bolt was $100+. I designed a parametric hook in OnShape, printed using PETG (for extra strength & durability) and picked up a ½ inch galvanized bolt and nut my local hardware store. Total cost was under $10.
I have been driving with it since September of 2021 and it is still working flawlessly.
Print Settings | |
|---|---|
| Printer | Prusa Mini+ |
| Rafts | No |
| Supports | Everywhere |
| Resolution | 0.20mm |
| Infill | 50% |
| Perimeters | 5 |
| Filament | Inland 1.75mm Orange PETG+ |
I used 50% infill and 5 perimeters to increase the strength per the suggestion on Prusa Knowledge Base.
Additional Parts | |
|---|---|
| 1/2 in.-13 x 6 in. Galvanized Hex Bolt | ~$3 |
| 1/2 in.-13 Galvanized Hex Nut | ~$1 |