1 / 3
Prusa Enclusure Top Mount Front Bowden Tube holder — zdjęcie 1
1 / 3

Prusa Enclusure Top Mount Front Bowden Tube holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,17 € – 0,21 € netto (bez VAT)

Dla pliku: Top Front Tube Holder_0.4n_0.1mm_PETG_MK4S_13m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,19 € netto (środek widełek).

Masa podana przez autora
2 g
Czas druku podany przez autora
13,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Mod setup to relocate the Bowden Tube to the front of the enclosure

Ocena
0 / 5
Polubienia
5
Pobrania
24
Wydruki
0
Wyświetlenia
223
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is a mod for MandicReally's design. I needed to run a 3K spool and used his original setup. I found that since my enclosures are kinda high, feeding the filament into the bowden tube was kinda a difficult due to my short arms. 

This relocates the PC4-M10 Pneumatic Coupler and the bowden tube to the front of the enclosure. 

The threads are included in the file so use fine detail prints. Also included is the Solidworks file if you would like to change any of the specs.

___________________________________________________________________________________________________

Parts needed:

  • Qty 1 - M3x4 bolt (found in the extra parts for the enclosure kit)
  • Qty 1 - M3nS nuts (found in the extra parts for the enclosure kit)
  • ABS recommended or PETG Filament

___________________________________________________________________________________________________
 

Recommend Print Settings:

  • Material ABS recommended or PETG
  • .10mm Layer height
  • 15% infill
  • No supports

Tagi