20 mm XYZ Calibration Cube by R3D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My "Cali-Cube": A simple 20mm XYZ Calibration cube featuring an upwart pointing arrow and a first-layer-squashing test.
- Ocena
- 4,879 / 5
- Polubienia
- 135
- Pobrania
- 4701
- Wydruki
- 44
- Wyświetlenia
- 7914
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This 20 x 20 x 20 mm calibration cube will help you with printer tuning.
I also added an upwart pointing arrow and a 3DBenchy-style first-layer-squashing test on the bottom of the print.
Printing Recommendations: 0.2 mm layer hight, no supports needed,
15 % infill, 3 perimeters.
Tipp: Optionally, to further calibrate your 3D printer, just print this cali cube and you can then measure this models dimensions against the expected dimensions as a starting point for e-step/flow calibration.
This is by purpose a quick test.
For a more comprehensive test you might want to print the All-In-One 3D-Test instead.
Hope you enjoy using this model.
Happy printing!
P.S.: Looking for an even more challenging print?
Check out the XYZ Benchy Cube!
https://www.printables.com/de/model/308495-the-xyz-benchy-cube
