1 / 2
Seigaiha Pattern Cover for Corne (CRKBD) Keyboard
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute patterned cover for the Corne keyboard.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 2
- Wyświetlenia
- 325
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (11)Powiązane
I designed this little cover after being inspired by a similar cover for a different keyboard. The design is inspired by the traditional Japanese Seigaiha pattern. This pattern symbolizes eternal peace and tranquility.
3D printing tips:
- The gaps are 0.4mm thick and 0.4mm deep. I would recommend using a 0.4 nozzle with a 0.2mm layer height.
- Print the cover with the pattern face down; it looks really good if you have a textured bed.
- Print it slowly. I would not recommend above 60mm/s. As for the first layer, print that under 30mm/s. I had bits and pieces of the pattern come off from printing too fast.
- Play around with the X-Y hole compensation, if your slicer allows for it. The holes on this part without adjustment are really tight, and the screw will eat away at the plastic when you screw it in, making it really difficult to install. For those with slicers that don't have that setting, I have provided a STEP file for manual adjustment of the screw holes.
Credits
Thank you SplitKB for providing a Corne cover DXF! If you want to design your own Corne cover, or a cover for a few other keyboards that have them, you can find them here.
I can't find the source of the cover that inspired me. It was for a Dao42, I think. The picture in question can be found here.
