1 / 9
3Dsets metal gear axles for Landy Rancher Bamboo Black Crow — zdjęcie 1
1 / 9

3Dsets metal gear axles for Landy Rancher Bamboo Black Crow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Metal gear axles adapted to 3Dsets Landy, Rancher and Bamboo models

Ocena
5 / 5
Polubienia
78
Pobrania
238
Wydruki
4
Wyświetlenia
2163
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Standard Digital File License

!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission should both be replaced to correct the ratio. See information below. 

3D Sets models here:  https://3dsets.com/product-category/models/ 

These metal geared axles combined with the GT2 metal geared transmission linked below give the 3Dsets Landy, Rancher and Bamboo new life. This mod improves the strength of the drivetrain reducing breakdowns and gives you more powerful motor options. Other than the ratio and wheel options, these axles should be direct replacement for the 3Dsets axles. These axles do not require new links. The 3Dsets recommended length of shocks are very important to the geometry. 

Setup: I got best results with 90mm shocks and 106mm to 113mm tires. These 3Dsets/Black Crow modification builds are slightly taller and more top heavy than the Black Crow Thumper model making them more tipsy both at high speed and rock crawling. 

Fine Tuning - 3Dsets Links: 

If you need to adjust the axle position, I have 3Dsets style links from 35mm to 180. ( If you find links lengths that work better for a model let me know and I will update files for that mode.)

https://www.printables.com/model/1196102-3dsets-style-links-35mm-to-150mm 

_________________________________________________________________________________________________________________

*************************************************************************************************

             ***Metal Gear Transmission*** 

Steve Eckerlein's GT2 metal gear and belt transmission here - (Please leave a like)  

 https://www.printables.com/model/1046021-3dsets-landyrancherbamboo-gt2-belt-gearbox-with-me/comments 

*************************************************************************************************

_________________________________________________________________________________________________________________

Parts for axles: (links are Amazon Affiliate)

Axles :

  1.  AR44 gears- “Ring and pinion” need two sets, one for the front and one for the back. ratio ( 8T-33T slow ) to (8T-24T fast ) https://amzn.to/3JgXBx2 
  2.  Axle shafts, Front and back - Compatible with Axial SCX 10 https://amzn.to/3PXuBOA 
  3.  Drive Shafts, Front and back - 105-155mm (5mm) https://amzn.to/3JgYBB6 

Axle Bearings:   4 bearings 7x14x3.5 ( 687) https://amzn.to/3W1t3Xs 

                           2 bearings 10x15x4 (6700-2RS) https://amzn.to/4cPEnfx 

                          10 bearings 5x11x4  (MR115-2RS) https://amzn.to/3VTBK68 

----------------------------------------------------------------------------------------------------------------

Other Parts:

Drive shafts https://amzn.to/4b3Ezr9 

110mm Tires https://amzn.to/3X4i4MS 

90mm Shocks https://amzn.to/4gHuXmP 

__________________________________________________________________________________________________________________

Screws:

Front Axle All: 

still counting 

Landy and Rancher rear axle:

M2 nuts - 12

M2 x 4mm - 2

M2 x 10mm -10

M2 x 18mm - 2

M2 x 25mm -2 

M4 Lock Nut - 2 

Bamboo Rear Axle:

M2 nuts - 12

M2 x 4mm - 2

M2 x 10mm -10

M2 x 18mm - 2

M2 x 25mm -2 

M4 Lock Nut - 2 

M3 lock nut -1 

M3 x 30mm -1

---------------------------------------------------------------------------------------------------------

Notes: 

All of the Black Crow wheels found in other listings will fit. You can also use a pin to 12mm hex adapter and use standard RC wheels.

Front Axles- The front axle is the same on all three models. 

Rear Landy and Rancher Axles- You can use 3 link with stabilizer or 4 link setup. You have two hole in the axle to center axle when using 3 link. 

Rear Bamboo Axle - You have two sets of holes to set shock level and axle stabilizer center 

----------------------------------------------------------------------------------------------------------------

Front Axle: Landy, Rancher, Bamboo

Landy and Rancher Rear Axle Assembly: 

Bamboo Rear Axle Assembly 

Wheel Assembly Video

New videos are in the works. This project has taken more time than expected. I released it as is for those that know about it and have been patiently waiting. 

Tagi