Canon R50 or R100 Grip - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed a Canon R50/R100 grip to be able to pull the battery and SD card out without the need of removing the grip.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 508
- Wydruki
- 4
- Wyświetlenia
- 2219
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Edit 06/07/25: Added smooth versions of the grip without the finger slots and uploaded the fusion360 files to make life easier for anyone that wants to remix, I didn't realize in all this time that I didn't upload it :(
Post your make if possible and feedback, I'd greatly appreciate it :)
This is a Canon R50/R100 grip remix from MakerWorld (original model on the left side). I really liked the original design however I found removing the grip to charge the camera either from the USB port or the battery itself a bit annoying, so I decided to make an opening for the Battery & SD compartment so the grip doesn't need to be removed.
I personally use the “Closed Ports” versions since I don't really use the USB nor the HDMI often, also it gives a little more protection in any case.
You may need to print or add a washer for your 1/4-20 UNC screw (also made the whole bigger for it)
Print Settings:
- 0.2 Layer Height
- 2 or 3 Walls
- 30% or more infill
- 4 top & bottom layers
I added modifiers for fuzzy skin in the slicer, didn't add it directly to the model so you can customize by yourself ;)