1 / 6
Belt Guide for Belt Tensioner (Sparco) — zdjęcie 1
1 / 6

Belt Guide for Belt Tensioner (Sparco)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a belt guide to replace the standard belt guide from Sparco. It is additionally required: 1x M8x100 2x ball…

Ocena
5 / 5
Polubienia
39
Pobrania
357
Wydruki
4
Wyświetlenia
2518
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This is a belt guide to replace the standard belt guide from Sparco.

It is additionally required:
1x M8x100
2x ball bearing 608zz - 8x22x7
4x M4x20
4x M4 nut

The nuts are inserted into the side of the front cover.
Do not overtighten the M8 bolt.

Just mirror the parts in your slicer for the other side.

Print Settings

Printer Brand:

Prusa

Printer:

Mk2.5s

Rafts:

No

Supports:

No

Resolution:

200

Infill:

38


Filament:

PM PETG, PLA

Notes:

Perimeters: 8
Horizontal shells Top: 12 Bottom :12

Solid infill every: 20 layers

Category: DIY

Tagi