The Ember - 3 PACK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 3 pack for FREE! The Ember Original, The Woven Ember and the Woven Ember with Holes. Enjoy!
The Ember Original lamp was initially an experiment - exploring how light interacts upon the negative space built into The Ember design. We had no idea how it would look like as a lamp, but as soon as we turned it on for the first time we felt peace and warmth radiate from this simple lamp. This lamp truly creates a calming atmosphere in any room.
For those with faster printers: Be sure to slow your printer down and that the temperature is hot enough while printing the diffusers
The Diffuser:
Z Height is 220 mm. Print in PETG
Vase Mode
Layer Height: .2 mm or .3 mm.
Bottom Layers: 4-5
The Base:
Can be printed on as small as Prusa Mini (177.8 mm).
Print in PLA or PETG
Layer Height: .2 or .3 mm
Infill: 15-20%
Hardware: 3 - 1/2 in. (12.7 mm) #8 Pan Socket Head Wood Screws
Dimensions:
Height: 10 inches (254 mm)
Width: 6 inches (152.4 mm)