Stackable Xmas Tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple stacking Christmas tree model
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Share Alike
Simple stacking Christmas tree model, each layer stacks on the base like the old ring stacking toys - the cap threads on, but depending on your printer, it might be a little tight.
Edit: Updated the tree base, tolerance was a little close.
I recommend that the base is printed with heavier infill than the usual 15% or so, you might even want to go 100% to make sure the spine is solid and that the base is nice and weighty.
The thread on the base for the cap might need sanding a little - I put quite a generous allowance on it in the model, but it's still a bit too tight with petg on my A1 - your mileage may vary.