Bed Insulation Retainer w/z-stop and cable chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed Insulation Retainer w/z-stop and cable chain
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bed insulation retainer with solid spacers, a z-stop, and cable chain. this is designed with my y-axis flip and other mods taken into account so so the placement of the z-stop may not be right for your setup, if your nozzle wont reach the front corner then it is possible to place the stop at the rear instead. Please comment if there is any interest in modifications to the design. I am continuing to refine this design and will add another version if it deviates a significant margin. it was designed to use these gaskets as insulation material: https://www.amazon.ca/dp/B0CQ56P6VD?ref=ppx_yo2ov_dt_b_fed_asin_title